Industrial Caulk & Seals production at its best...

Industrial Caulk & Seal has been contracted to complete a 136,000 Ln. Ft. MM-80 joint fill installation throughout an 800,000 Sq. Ft. warehouse in an undisclosed location.

Cory Flohr and Joe Dean, Industrial Caulk & Seals sales team, teamed up on this project due to its size and together they estimated the designated joint fill scope to take approximately 38 working days to complete. Though remarkably for this amount of work Larry McCracken, the foreman leading this project, and his men will be finishing up this job 2 working weeks ahead of schedule.

When asked what factors made it possible to make such quick progress Larry was quick to come back to say his team. He had said that “The floor is wide open, so we get there, and everyone knows exactly what to do. We have a really good program in place where each guy is focusing on one step of the joint fill process which results in us filling well beyond our daily footage goals”.

The Joint fill process is as follows:
1. Apply Stain preventative film
2. Mechanically clean joints
3. Remove dirt and debris from joints
4. Fill joints with Metzger McGuire’s, MM80
5. Shave off overfill

This project was not always easy for Larry and his crew. The first few days on site Larry and his men had to make do with very limited lighting. Overcoming all obstacles, Industrial Caulk & Seal can effortlessly say that Mr. McCracken’s progress on this project has been prodigious.

In the Spotlight:
A Special offer from ICS:
Industrial Caulk & Seal is offering both an absolutely free comprehensive floor survey and a 10% discount on any floor repairs scheduled between January 1, 2018 and March 31, 2018! Upcoming Projects:

Navistar- 140,000 SF Strip & Seal
Village Volvo- 21,130 SF Grind & Polish
Kopit Dental- 3,400 SF Grind & Polish